AL-KO JET 4000 Traducción Del Manual Original De Instrucciones página 18

GB
7 LED DISPLAYS
7.1 normal operation
Switching condition
Press the START /STOP
button.
Pump switches on and
starts to draw water.
Pump running.
Press the START /STOP
button.
Pump switches off.
7.2 Special mode
In order to use a Hydrocontrol or a remote control
switch, the pump must start automatically, the
special mode must be actuated for this.
Switching condition
Activating special
mode: Hold the START/
STOP button depressed
for 10 seconds while in-
serting the mains plug.
Deactivating special
mode: Hold the START/
STOP button depressed
for 10 seconds while in-
serting the mains plug.
18
LED display Function / action
PUMP ON LED Commissioning: Suction and pressure side con-
lights up. FLOW nected, pump filled with water, water present on suc-
CONTROL LED tion side. Pump connected to mains.
flashes.
PUMP ON LED Pump delivering water. Water is removed on the
lights up. pressure side.
LEDs out. The pump is switched off.
LED display Function / action
All LEDs flash. Pump now starts immediately. Mode is retained,
even when the mains voltage is disconnected. Spe-
cial mode is active when the PUMP ON LED flashes
during operation.
All LED displays Pump switches off immediately. Start again by press-
ing the START/STOP button
Flash.
LED displays
JET 4000 - 6000 | JET 4600