Qilive Q.6379 Manual De Instrucciones página 17

2. When the error occurs, the display panel shows the error code. Otherwise, the display panel
shows the set temperature.
3. Generally, the setting data will take effect after 30s without door opening action or key
operation, and the display panel will go out after 30s. When the display panel is not lit, the
display panel will normally light up if there is a key operation.
The display panel will light up in case of error with "visible error code", then the display panel
will go out after 30s.
4. Press the button
5. Press the temperature up button " " can adjust the temperature, each click of the temperature
up button " ", the set temperature will be rised 1°C; Press the temperature down button "
can adjust the temperature,each click of the temperature down button "
will be reduced 1°C; The temperature setting range of refrigerating chamber is 2~8°C. When
the temperature is adjusted to the boundary value, the refrigerator will sound an alarm if the
temperature up button " " or the temperature up button "
6. Press the temperature up button " " can adjust the temperature,each click of the temperature
up button " " , the set temperature will be rised 1°C; Press the temperature down button "
can adjust the temperature, each click of the temperature down button "
will be reduced 1°C; The temperature setting range of freezing chamber is -16~-24°C. When
the temperature is adjusted to the boundary value, the refrigerator will sound an alarm if the
temperature up button " " or the temperature up button "
7. Set the Super cooling mode: after the temperature of the refrigeration room is adjusted to 2°C,
press the temperature down button "
mode, the temperature of the refrigerating chamber is automatically set to 2°C.
8. Exit the Super cooling mode: press the temperature up button " " to exit the super cooling
mode or automatically exit the super cooling mode after 6h. After exiting the super cooling
mode, the temperature of the refrigerator will automatically return to the temperature set
before the super cooling mode.
9. Set the super freezing mode: after the temperature of the freezing chamber is adjusted to
- 24 °C, press the temperature down button "
freezing mode, the temperature of the freezing chamber is automatically set to - 24°C.
10. Exit the super freezing mode: press the temperature up button " " to exit the super freezing
mode or automatically exit the super freezing mode after 24h. After exiting the super freezing
mode, the freezing chamber temperature will automatically return to the temperature set
before the super freezing mode.
11. Opening alarm control
If the door is not closed in two minutes, the buzzer will sound untill the door is closed. Press
any one button to stop the buzzer alarm.
12. Fault indication
The following warnings appearing on the dispaly indicate corresponding faults of the
refrigerator. The user shall contact a maintenance specialist for maintenance, so as to ensure
optimized operation of the appliance.
Fault code Fault description
E2 Temperature sensor failure of Refrigerating / freezing chamber
E5 Deforst sensor detection circuit error
E6 Communication error
E7 Ambient temperature sensor error
Note: The quick-freezing function is designed to maintain the nutritional value of the food in the
freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it
is recommended that the user turn on the quick-freezing function and put the food in. At this time,
the freezing speed of the freezer compartment is increased, which can quickly freeze the food,
effectively lock the nutrition of the food, and facilitate storage.
for 3 seconds to achieve Fridge/Freezer conversion.
" to enter the super cooling mode. In the super cooling
∨
" to enter the super freezing mode. In the super
∨
17
", the set temperature
∨
" still have been pressed.
∨
", the set temperature
∨
" still have been pressed.
∨
EN
"
∨
"
∨