Publicidad
Idiomas disponibles
Idiomas disponibles
SIHt IIII,,,,,C@AIIII,,,,,
SIIII::::: @NGS
There
are 2 ways to set "BD Audio
Mode"
setting;
whether
to output
the secondary
and interactive
audio
accompanied
by the primary
audio
or only the
primary
audio.
Depending
on the setting
of the mode,
Dolby
Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, or DTS-HD
output
changes
between
multi LPCM and bitstream.
1 In stop mode with BD inserted, press
[MODE].
2 Use [A / v] to select your desired
setting.
"Mix
Audio Output":
If it is available,
BD-video's
secondary
and interactive
audio will be output
with the primary
audio.
• The secondary
audio is the audio for the secondary
video (Director's
comment
etc.) and the interactive
audio is the audio for the interactive
application
(Button
click sounds etc.).
"HD Audio Output":
Only the primary
audio will be output.
Set this mode in
order to output
Dolby Digital,
Dolby Digital
Plus, Dolby
TrueHD,
DTS or DTS-HD audio of BD through
HDMI
connection.
3
Press [RETURN
-._] to exit.
• You can also set "BD Audio Mode" from the setup
menu. Refer to page 36.
You can adjust the picture
quality.
1 During playback, press [MODE].
2 Use [A Iv] to select your desired item,
then use [<1 / I_] to adjust the setting.
•
Black
level
You can adjust the black level setting
to make the black
parts of the pictures
as bright
as you prefer. You can
select "On" or "Off"
"On":
Makes the dark parts brighter.
"Off":
Shows the original
pictureas
recorded.
•
Noise
reduction
Reduces the noise of the playback
picture.
"1": Executes MPEG noise reduction
which reduces the
block noise and mosquito
noise on the subtitle
on
movie.
"2": Executes 3D noise reduction
which detects and
deletes the noise by comparing
each picture
frames.
"3": Executes both MPEG noise reduction
and 3D noise
reduction.
3 Press [RETURN _._] repeatedly
to exit.
30
EN
Publicidad
