Publicidad
Idiomas disponibles
Idiomas disponibles
IIFUNCTIIIiON 5111,,,,,,,
1UII,
Still Mode
Adjusts picture resolution
and
quality
in still mode.
Auto_:
Automatically
selects the best resolution
setting
("Frame" or "Field")
based
on the data characteristics
of the pictures.
Field:
Stabilizes the pictures, although
the picture
quality
may become coarse
due to the limited
amount
of data. Select "Field" when the pictures
are still
unstable
even if "Auto"
is selected.
Frame:
Displays relatively
motionless
pictures
in higher
resolution.
"Frame"
improves
the picture
quality,
although
it may unstabilize
the pictures
due
to alternate
output
of 2-field data.
• Settings with (*) are the default.
• "Quick" menu
consists of the setting
menus frequently
used, and they are accompanied
with
_ .
• If you set "HDMI Video Resolution"
setting
to "1080p24"
and the contents
of the BD are not compatible
for
1080p24 frame, 1080p60 frame will be output.
;:
• An individual
picture
on the TV screen is called as "Frame",
which consists of two separate images
called as
<
"Field". Some pictures
may be blurred at the auto setting
in "Still Mode" setting
due to their data characteristics.
• If the picture
is not output
properly
to the TV because of'HDMI
Video Resolution"
or "Component
Output"
_
setting,
press and hold [ I_ PLAY] on the front panel for more than S seconds. Both settings
will be reset to the
default
automatically.
• If an HDMI cable is connected,
for video resolution
for the component
output,
you can only select video
resolution
that currently
output
from HDMI OUT jack or "480i".
/
• If the video resolution
for the component
output
and HDMI video resolution
do not match, the video resolution
for the component
output
will be switched
to "480i". COMPONENT VIDEO OUT jacks may not output
any signals
depending
on the disc material.
• If you play back copy-protected
DVD-video,
480p signal will be output
from COMPONENT
VIDEO OUT jacks,
when "Component
Output"
setting
is set to "720p" or "1080i".
_©
EN
35
Publicidad
