Publicidad
Idiomas disponibles
Idiomas disponibles
If the unit does not perform
properly
when operated
as instructed
in this manual, check the unit, consulting
the
following
checklist.
No power
- Check if the AC cord is properly
connected.
- Unplug the AC cord once, and wait for 5=10 seconds and then
plug it in again.
No sound or picture
- Check if the connected
TV is turned
on.
- Check if the connections
are made securely and correctly.
- Check whether
the connected
TV or other device supports
HDCP. (This unit will
not output
a video signal unless the other device supports
HDCP.)
- Check whether
the output
format
of this unit (HDMI FORMAT) matches the
supported
input format of other connected
device.
- Set "HDMI Video Resolution"
setting
ot her than "Auto"
or "1080p24".
Distorted
picture
- Sometimes
a small amount
of picture
distortion
may appear.
This is not a malfunction.
- Connect this unit directly to the TV. If the RCA audio / video cables are connected
to a VCR, pictures may be distorted
due to the copy right protection
system.
Completely
distorted picture or
- Make sure the disc is compatible
with this unit.
black / white picture with BD / DVD
No sound or distorted
sound
- Adjust the volume.
- Check that the speakers are connected
correctly.
- Check the HDMI connections.
- Check the settings
in "_
Audio"
menu.
Picture freezes momentarily
- Check the disc for fingerprints
/ scratches and clean with a soft cloth wiping
during
playback
from center to edge.
Clean the disc.
Disc cannot
be played back
Clean the disc.
Ensure the disc label is facing up.
Check if the disc is defective
by trying
another
disc.
Cancel the ratings control
or change the control
level.
Insert a correct disc that can be played back on this unit.
SD Memory
Card cannot
be read.
The format
of the card does not match to this unit or the card is not compatible.
No return to start=up screen
Reset this unit by turning
it off, then on again.
when disc is removed
The unit does not respond
to the
- Aim the remote
control
directly at infrared
sensor window
on the front panel.
remote control
- Reduce the distance to infrared sensor window.
- Replace the batteries
in the remote control.
- Re=insert the batteries
with their polarities
(+ / - signs) as indicated.
Buttons do not work or the unit
- To completely
reset the unit, unplug
the AC cord from the AC outlet
for 5=10
stops responding
seconds.
The unit does not respond
to
- Operations
may not be permitted
by the disc.
some operating
commands
Refer to the instructions
of the disc.
during
playback
The unit cannot read BD / DVD /
- Condensation?
(Let sit 1 or 2 hours)
CD
- You are attempting
to playback
a disc other than one with one of the marks on
page 17.
- Wipe the dirt off the disc or replace the disc.
Angle does not switch
- The angle cannot
be switched
for BD / DVD which do not contain
multiple
angles. In some cases multiple
angles are only recorded
for specific scenes.
Playback does not start when
- Check the settings
in " _
Parental"
menu.
the title is selected
The password for rating level has
- Enter the default
password
"4737",then
your forgotten
password
will be cleared.
been forgotten
/
EN
43
Publicidad
