Publicidad
Idiomas disponibles
Idiomas disponibles
Driving nails or staples
▸
Hold the device firmly and stand in a stable
position.
▸
Press the workpiece contact squarely against the
material surface.
The device safety mechanism is deactivated, the
3
fan motor starts.
▸
Press the trigger to drive the staple or the nail into
the material surface.
Attention!
Never hold your hand directly in front of
¾
the intake opening since this may cause
malfunctions!
Note
Ignition can only occur if the workpiece
contact is fully pressed in.
▸
Release the trigger and remove the device.
The exhaust gas is discharged via the openings in
3
the housing. Simultaneously fresh air is blown in
the combustion chamber.
Risk of severe injuries due to burns.
The device is designed for continuous
Â
operation. In this process, the work-
piece contact can become very hot.
Avoid contact with the workpiece
¾
contact.
If you detect visible defects,
¾
immediately stop working with the
device and have it repaired by
Würth.
CAUTION!
Transport & storage
Risk of severe injuries.
Unintentional triggering can result
Â
in injuries.
At the end of the working day,
¾
during lengthy breaks, transport
and storage, always remove the
battery and the gas cartridge from
the device.
Always store gas cartridges
¾
separately and on a save place.
Unauthorized persons, in particular
children, may not get access to the
device or to gas cartridges.
Attention!
Store the device and the battery in the genuine
¾
tool box on a safe, dry, heat- and frost-proof
place.
▸
Store the battery outside the device in a cool
place.
▸
If the device will not be used for long periods,
charge the battery every 3–4 months.
The battery may be destroyed in the event of a
Â
deep discharge. The optimum charge level for
storage is between 50–80%.
Accessories and spare parts
If in spite of careful manufacturing and testing
processes, the device becomes faulty, a repair by
Würth masterService should be arranged.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Maintenance / care
Risk of severe injuries.
Do not open the device.
¾
Remove the battery and the gas
¾
cartridge before carrying out any
work on the device.
WARNING!
WARNING!
35
Publicidad
