Publicidad
Idiomas disponibles
Idiomas disponibles
content histogram in order to provide deeper black
and brighter white perception. Set your Adaptive
Luma Control preference as Low, Medium,
Strong or turn it o by setting as O .
Local Contrast Control: Local contrast control
divides each frame to de ned small regions and
provides ability to apply independent contrast set-
ting for each region. This algorithm improves ne
details and provides better contrast perception.
It makes higher depth impression by enhancing
dark and bright areas without any detail loss. Set
your Local Contrast Control preference as Low,
Medium, High or turn it o by setting as O .
Flesh Tone: Adjusts the skin tone brightness.
Set your preference as Low, Medium, or High
to enable. Set as O to disable.
DI Film Mode: It is the function for 3:2 or 2:2
cadence detection for 24 fps lm content and
improves the side e ects (like interlacing e ect
or judder) which are caused by these pull down
methods. Set your DI Film Mode preference as
Auto or turn it o by setting as O . This item
will not be available if Game Mode or PC Mode
is turned on.
Blue Stretch: Human eye perceives cooler whites
as brighter white, Blue Stretch feature changes
White balance of mid-high grey levels to cooler
colour temperature. Turn the Blue Stretch function
on or o .
Game Mode: Game mode is the mode which cuts
down some of the picture processing algorithms
to keep up with video games that have fast frame
rates. Turn the Game Mode function on or o .
ALLM: ALLM (Auto Low Latency Mode) function
allows the TV to activate or deactivate low latency
settings depending on playback content. Highlight
this option and press OK to turn the ALLM function
on or o .
PC Mode: PC Mode is the mode which cuts down
some of the picture processing algorithms to keep
signal type as it is. It can be usable especially for
RGB inputs. Turn the PC Mode function on or o .
De-Contour: Decreases the contour e ects in
low-resolution content and auto streaming servic-
es. Set your preference as Low, Middle, or High
to enable. Set as O to disable.
MJC: Optimises the TV's video settings for
motional images to acquire a better quality and
readability. Highlight this option and press OK to
see available options. E ect, Demo Partition,
and Demo options will be available. Set the
E ect option to Low, Middle, or High to enable
the MJC function. When enabled, Demo Parti-
tion and Demo options will become available.
Highlight Demo Partition and press OK to set
English - 19 -
your preference. All, Right and Left options will
be available. Highlight Demo and press OK to
activate the demo mode. While the demo mode
is active, the screen will be divided into two sec-
tions, one displaying the MJC activity, the other
displaying the normal settings for the TV screen.
If the Demo Partition option is set to All, both
sides will display the MJC activity.
HDMI RGB Range: This setting should be ad-
justed according to input RGB signal range on
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Low Blue Light: Electronic device screens emit
blue light that can cause eye strain and may lead
to eye problems over time. To reduce the e ect
of blue light set your preference as Low, Middle,
or High. Set as O to disable.
Colour Space: You can use this option to set the
range of colours displayed on your TV screen.
When set as On, colours are set according to the
source signal. When set as Auto, the TV decides
to set this function as on or o dynamically, ac-
cording to source signal type. When set as O , the
TV's maximum colour capacity is used by default.
Colour Tuner: Colour saturation, hue, brightness
can be adjustable for red, green, blue, cyan, ma-
genta, yellow and esh tone (skin tone) for having
more vivid or more natural image. Set the HUE,
Colour, Brightness, Offset and Gain values
manually. Highlight Enable and press OK to turn
this function on.
11 Point White Balance Correction: White bal-
ance feature calibrates TV's colour temperature in
detailed grey levels. By visually or measurement,
grey scale uniformity can be improved. Adjust the
strength of the Red, Green, Blue colours and Gain
value manually. Highlight Enable and press OK to
turn this function on.
Reset to Default: Reset the video settings to factory
default settings.
Note: Depending on the currently set input source some menu
options may not be available.
Sound
System Sounds: System sound is the sound
played when navigating or selecting an item on the
TV screen. Highlight this option and press OK to
turn this function on or o .
Sound Style: For easy sound adjustment, you
can select a preset setting. User, Standard,
Vivid, Sports, Movie, Music and News options
will be available. Sound settings will be adjusted
according to the selected sound style. Some other
sound options may become unavailable depending
on the selection.
Balance: Adjust the left and right volume balance
for speakers and headphones.
Sound Surround: Turn the surround sound feature
on or o .
Equalizer Detail: Adjust the equalizer values ac-
cording to your preferences.
Speakers Delay: Adjust the delay value for speakers.
eARC: Set your eARC preference. O and Auto
options will be available. Set as O to disable.
Digital Output: Set the digital sound output prefer-
ence. Auto, Bypass, PCM, Dolby Digital Plus and
Dolby Digital options will be available. Highlight the
option you prefer and press OK to set.
Digital Output Delay: Adjust the digital output delay
value.
Auto Volume Control: With Auto Volume Control,
you can set the TV to automatically level out sudden
volume di erences. Typically at the beginning of
adverts or when you are switching channels. Turn
this option on/o by pressing OK.
Downmix Mode: Set your preference to convert mul-
ti-channel audio signals to two-channel audio signals.
Press OK to see the options and set. Stereo and
Surround options will be available. Highlight the
option you prefer and press OK to set.
DTS DRC: Dynamic Range Control provides gain
adjustment of the source to maintain suitable au-
dible range at both low and high playback levels.
Turn this option on/o by pressing OK.
Dolby Audio Processing: With Dolby Audio Pro-
cessing, you can improve the sound quality of your
TV. Press OK to see the options and set. Some other
sound options may become unavailable and appear
as greyed out depending on the settings made here.
Set the Dolby Audio Processing option to O if
you would like to change these settings.
Dolby Audio Processing: Highlight this option
and press OK to turn this function on/o . Some
options may not be available if this option is not
turned on.
Sound Mode: If the Dolby Audio Processing
option is turned on Sound Mode option will be
available to set. Highlight the Sound Mode option
and press OK to see the preset sound modes.
Game, Movie, Music, News, Stadium, Smart
and User options will be available. Highlight the
option you prefer and press OK to set. Some
options may not be available if this option is not
set to User.
Volume Leveler: Allows you to balance the sound
levels. In this way, you are minimally a ected by
English - 20 -
abnormal sound rises and falls. Turn this feature
on/o by pressing OK.
Surround Virtualiser: Turn the surround virtual-
iser feature on or o .
Dolby Atmos: Your TV supports Dolby Atmos
technology. By means of this technology the sound
moves around you in three-dimensional space, so
you feel like you're inside the action. You will have
best experience if input audio bitstream is Atmos.
Turn this option on/o by pressing OK.
Dialogue Enhancer: This feature provides sound
postprocessing options for speech-gated dialogue
enhancement. O , Low, Medium and High options
will be available. Set according your preference.
Note:
only applies to TV loudspeaker output.
Dolby Atmos Noti cation: Set your noti cation
appearance preference for Dolby Atmos content.
When turned on, Dolby Atmos logo will be dis-
played on the screen when Dolby Atmos content
is detected.
DTS Virtual:X: This feature will enhance your sound
experience by providing a virtualisation of surround
speakers through your TV's speakers. Highlight Vir-
tual:X and press OK. TruBass option will become
available. TruBass manages and enhances low fre-
quency signals. Highlight this option and press OK
to turn it on or o . Some other options may become
unavailable and appear as greyed out depending on
the setting made here. This item will not be available
if Dolby Audio Processing is turned on.
Reset to Default: Resets the sound settings to
factory defaults.
Storage: View the total storage space status of the TV
and connected devices if available. To see detailed in-
formation on the usage details highlight and press OK.
There will also be options for ejecting and setting up
the connected USB storage devices as device storage.
Eject: To keep your content safe, eject your USB
storage device before you unplug it from your TV.
Erase & format as device storage: You can use
the connected USB storage device to extend the
storage capacity of your TV. After doing this, that
device will only be usable with the TV. Follow the
on-screen instructions and read the information
displayed on the screen before proceeding.
Note: Formatting the connected storage device will erase
before you proceed with formatting the device.
Erase & format as removable storage: If you did
priorly format your USB storage device as device
storage, it will only be usable with your TV. You
can use this option to format it again in order to
use it with other devices. Before proceeding with
Publicidad
