Publicidad
Idiomas disponibles
Idiomas disponibles
■
Do not expose tools to rain
■
Do not use tools in damp or wet places
■
Keep the work area well lit.
■
Do not use tools in the presence of flammable liquids or gases.
To protect against electric shock
■
Avoid body contact with grounded surfaces or mass (pipes, radiators, stoves, refrigerators).
Keep others away
■
Do not allow people, especially children , not workers , contact tool or extendable cables and
keep them away from the work area.
Storing the tools are not being used
■
When not in use, tools should be stored in a dry, locked place out of reach of children.
Do not force tool
■
ÉThis one will job better and safer at the assigned mode feature which is intended.
Use the correct tool
■
Do not force a small tool to do the job corresponding to a heavy tool.
■
Do not use tools for purposes for which they are not intended ; for example , do not use
circular saws to cut tree limbs or logs.
Dress appropriately
■
Do not use large clothes or jewelry that may be caught by moving parts clothing.
■
AntiSlip footwear is recommended when working outdoors.
■
Wear protective hats for long hair.
Use protective equipment
■
Wear safety glasses.
■
Use masks to prevent dust if cutting operations can produce.
Connect dust extraction equipment
■
If devices for connection to dust extraction equipment and collecting equipment are provided
, ensure these are connected and are used properly.
Do not ill-use the cables
■
Never pull the cord to disconnect it from the conection box. Keep cord away from heat, oil
and sharp edges.
Ensure the work
■
When possible, use clamps or a vise to hold work. It's safer than using your hand.
Do not extend your range too
■
Maintain a strong support on the ground and maintain balance at all times.
Maintan tools with care
■
Keep tools sharp and clean for better and safer performance.
■
Follow instructions for lubricating and changing accessories.
■
EPeriodically review the tool and cables for damage repair through an authorized service.
■
Examine extension cords periodically and replace if damaged.
■
Keep dry the handle and grips, clean ,and free of grease and oil.
Disconnect tools
■
When not in use , disconnect the power tools before repair as accessories such as blades,
bits and cutters are changed.
Remove adjusting keys and wrenches
■
Getting used to check that adjusting keys are removed from the tool before operating.
Avoiding an unintended start
■
Ensure that the switch is in "open" position when the tool is plugged.
Be carefull
■
Look what you doing, use common sense and do not work with the tool when you are tired.
Check damaged parts
■
Before re- using the tool, it should be carefully checked to determine that it will operate
properly and will be suitable for the role to which it is intended.
■
Check the alignment and fixing of moving parts, breakage of parts, mounting, and other con-
ditions that may affect its operation.
■
A guard or other part that is damaged should be properly repaired or replaced by an authori-
zed service center, unless otherwise specified in this instruction manual indicated.
■
Defective switches must be replaced by an authorized service.
■
Do not use tool if switch does not turn on and off.
WARNING!
■
The use of any accessory or other supplement recommended in this instruction manual may
create a personal injury risk.
Make the tool service by qualified personnel
■
This power tool complies with the requirements of appropriate security. Repairs should
only be carried out by qualified personnel using original spare parts, otherwise there could be
a significant risk to the user.
English
TRANSLATION OF THE ORIGINAL
E. MAINTENANCE
Cleaning and maintenance
1.
2.
3.
4.
5.
6.
F. GENERAL CHARACTERISTICS
Technical characteristics.............................................................................................................................Pag.28
The overall machine.....................................................................................................................................Pag.26
Accessories.....................................................................................................................................................Pag.28
Decalaration of compliance with eec regulations.....................................................................Pag.29
Electric mitring saws for tiles.........................................................................................................Pag.27
Without the previous authorisation of GERMANS BOADA S.A., the partial or total re-
production of this manual, in any format or by any means or process, is strictly prohibited,
whether such reproduction be mechanical, photographic or electronic.
Any of these activities will incur legal liability and may give rise to penal action being taken.
GERMANS BOADA S. A. reserves the right to make any technical modification without
previous notice.
Before cleaning, maintenance or repair of the machine, or transport, the machine must
be turned off and unplugged..
Do not use aggressive cleaning products for cleaning the machine.
The machine must not be immersed in water.
Examine periodically the machine cables, if they are damaged must repair them through an
authorized technical service.
You must maintain the grips dry, clean and free of fat and oil.
To keep your machine in good condition, we recommend that you clean it with water
after using it and run clean water through the cooling system,especially to clean the
submer sible pump.
5.
Publicidad
