Setting Strap Width - Signode BXT2 Manual De Operación, Partes Y Seguridad

SIGNODE BXT2
1 2
Fig. 15
1
Fig. 16
22
3 4
7
6
5
3
2
4

5.9 SETTING STRAP WIDTH

The tool can be used with three different strap
widths:
1
– 12–13 mm ( / ")
2
– 15–16 mm ( 5 / ")
8
– 9–11 mm (option)
a) Change strap width from 12–13 mm to 15–16 mm
– Remove battery from tool.
– Release sunk screw (15/2) and remove strap stop
13 mm (15/1).
– Lift the rocker lever towards the handle, release
sunk screw (15/4) and remove strap guide 13 mm
(15/3).
– Remove three cylinder screws (16/2).
– Lift the rocker lever towards the handle, remove cylin-
der screw (16/4) together with the strap stop rear
13 mm (16/3).
– Remove cover (16/1).
– Remove oval head screw (16/7) and remove strap
guide rear 13 mm (16/6) from lever.
– Install cover (16/1).
– Mount strap stop rear 16 mm (16/5).
b) Change strap width from 15–16 mm to 12–13 mm
– Mount 13 mm strap stop (15/1) and secure sunk
screw (15/2) with Loctite 222.
– Mount 13 mm strap guide (15/3) and secure sunk
screw (15/4) with Loctite 222.
– Remove strap stop rear 16 mm (16/5).
– Remove three cylinder screws (16/2) and remove
cover (16/1).
– Mount strap guide rear 13 mm (16/6).
– Install cover (16/1).
– Mount strap stop rear 13 mm (16/3).
11.11