Trouble Shooting - Signode BXT2 Manual De Operación, Partes Y Seguridad

SIGNODE BXT2
FAULT / AVERÍA / PANNE
28
E +
E11
E20
E22
E23
E37

7.4 TROUBLE SHOOTING

If a malfunction occurs, the digital display blinks and
displays error "E" followed by the error number.
FAULT:
Rocker lever was operated before the cooling-down
period had elapsed.
ACTION:
– Operate the rocker lever only when the cooling-down
period has elapsed..
FAULT:
The battery used is not the right type.
CAUSE:
– Wrong battery.
ACTION:
– Use the correct battery.
– Restart by removing/replacing the battery.
FAULT:
Battery too hot.
CAUSE:
– Battery temperature above 60°C.
ACTION:
– Let the battery cool down.
– Replace the battery.
FAULT:
Motor overload protection.
CAUSE:
– The motor was overloaded.
ACTION:
– Let the motor cool down.
FAULT:
Battery discharged.
CAUSE:
– The lowest charge limit of the battery has been
reached.
ACTION:
– Charge/replace the battery.
FAULT:
Rocker lever is blocked.
CAUSE:
– Tool blocks when welding.
ACTION:
– Refer to chapter 6.3 or by Service Centre.
For other error numbers not described here,
please contact the Service Centre.
11.11