Black and Decker BWDS Manual De Instrucciones página 14

SET UP & USE
Line up the hole of one side of 1T (TOP REINFORCING BAR) with the top back hole
of 5R (UPPER RIGHT BACK VERTICAL POLE). Insert a 45L (45mm LONG SCREW)
through an ANTI-TIP BRACKET first, all the way through 1T (TOP REINFORCING
BAR) and secure into 5R (UPPER RIGHT BACK VERTICAL POLE).
NOTE: Follow the same steps to assemble the left side.
ANTI-TIP BRACKET
45L
45L
ANTI-TIP BRACKET
1T
45L
2T
5L 45L
ANTI-TIP BRACKET
5R 1T
4L
4R
45L
5R
Line up the hole of one side of 2T (TOP REINFORCING BAR) with the top back hole
of 4R (UPPER RIGHT FRONT VERTICAL POLE). Insert a 45L (45mm LONG SCREW)
through 2T (TOP REINFORCING BAR) and secure into 4R (UPPER RIGHT FRONT
VERTICAL POLE).
NOTE: Follow the same steps to assemble the left side.
Page 14