Black and Decker BWDS Manual De Instrucciones página 9

SET UP & USE
Using the diagram below as reference to position the poles, INSERT 2R (LOWER
RIGHT FRONT VERTICAL POLE) into 1R (RIGHT BASE). The base of the poles should
be positioned between the 1R (RIGHT BASE) slots and aligned with the holes. Use
35M (35mm MEDIUM SCREWS) to secure. It should be inserted from the outside of
R1 (RIGHT BASE) and inserted fully through the hole of the pole to secure.
NOTE: Follow the same steps to insert 2L (LOWER LEFT FRONT VERTICAL POLE)
into 1L (LEFT BASE) on the left side.
2L
2R
1L
1R
1L
1L
2L
1F
Page 9