Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
11. Connect electrical connector 1 as described in step 3. Then fit part 2 (it is in the plastic bag).
12. Turn part 1 by 180° and place it in the left-hand corner of the door. Then fit part 2 (the two parts remo-
ved in step 2).
13. Remove the magnetic switch from the contact block (part 3 of step 3) and mount it on the other con-
tact block (it is marked with an R on the plastic bag). Insert the contact block you have just removed into
the plastic bag.
Make sure that the magnetic switch fits securely into the contact block.
14. Fit part 1, connect cable connector 2 and then fit part 3.
40
infiniton.es
Publicidad
