Kobalt KST 2180-06 Manual Del Usuario página 10

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 5 - 10 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
WARNING
To avoid injury and to reduce the risk of electrical shock or fire:
• Replace the battery or charger immediately if the battery case or charger cord is damaged.
• Always make sure the string trimmer switch is OFF before inserting or removing the battery.
• Always make sure the battery is removed and the switch is turned OFF before inspecting, adjusting,
or maintaining any other part of the string trimmer.
• Read, understand, and follow the Battery Charger instructions.
1. Installing the guard
CAUTION
To avoid injury, always remove the battery before
installing the guard, changing a cutting line, or
making any adjustments. If the guard is damaged,
do not use the grass trimmer until it is replaced.
Note: Install the protective guard before
operating the grass trimmer. It should not be
removed or disassembled.
• Invert the grass trimmer to access the trimmer
head.
• Using a phillips head screwdriver (not included),
remove the pre-installed screws (AA) from the
trimmer guard.
• Place the guard (L) onto the trimmer head.
• Align the screw holes on the guard with the screw
holes on the trimmer head.
• Insert the screws into the trimmer head and
tighten to fasten the guard in place.
Hardware Used
AA
Screw
1
x 2
10
AA
L