Kobalt KST 2180-06 Manual Del Usuario página 16

ASSEMBLY INSTRUCTIONS
6. Adjusting the cutter-off blade
This trimmer is equipped with a line cut-off
blade on the guard. Advance line when trimming
efficiency diminishes. This will maintain best
performance and keep line long enough to
advance properly. This trimmer is currently set at
the 15 in. (381 mm) cutting swath. To adjust to a
cutting swath of 17 in. (432 mm):
• Remove both screws on the cut-off blade (K) with
a phillips head screwdriver.
• Rotate the cut-off blade 180°.
• Replace both screws in the cut-off blade.
Note: Set the cut-off blade to 15 in. (381 mm)
for greater runtime. Set the cut-off blade to 17 in.
(432 mm) for greater cutting area.
7. Installing / removing the battery
IMPORTANT
The battery is not charged when it is purchased.
Before using the trimmer for the first time, place
the battery in the battery charger and charge.
To install the battery
• Align the battery with the cavity in the string
trimmer housing.
• Insert the battery into the handle until the battery
release button (A) locks into place.
• Push down on the battery until it locks into place.
You should hear a "click" once it is installed.
To remove the battery
• Press the battery release button (A) on the string trimmer. This will cause the battery to raise out of the
tool slightly.
• Grasp the trimmer firmly and pull the battery out of the handle.
Note: The battery fits into the handle snugly in order to prevent accidental dislodging.
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
• Replace the battery immediately if the battery case is damaged.
• Verify that the switch is in the OFF position before inserting or removing the battery.
• Verify that the battery is removed and the switch is in the OFF position before inspecting, adjusting, or
performing maintenance on any part of the string trimmer.
6
7
A
16
K