Kobalt KST 2180-06 Manual Del Usuario página 19

CARE AND MAINTENANCE
1. Trimmer guard and motor maintenance
Note: Before performing maintenance, remove battery from the tool.
1a. Remove dirt and debris from guard using a paint
brush (not included).
1b. Clean dirt and debris off of motor cover and
connection joints.
1c. Clean line cutter blades by using a wire brush
and spraying with an appropriate degreaser.
1d. Inspect spool cover and line to ensure that
there is an adequate amount of line and that no
damage is present on the spool cover.
1a
1b
1c
1d
19