Kobalt KST 2180-06 Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
2. Connecting upper / lower trimmer tubes
2a. Push in the release button located on the lower
tube (H).
• Align the release button with the positioning hole
on the upper tube (F) and slide the two tubes
together.
• Rotate the lower tube until the release button
locks into the positioning hole.
2b. Tighten the screw with the hex wrench (DD).
Hardware Used
DD
Hex Wrench
2a
Release button
2b
x 1
11
Positioning hole
H
F
DD