Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING AND MAINTENANCE MANUAL
SWITCHMATIC 2T SERIES CONTROLLER
• ART (Automatic Reset Test) function. When the device is disconnected due to the
intervention of the protection system due to lack of water, the ART attempts, with a
programmed periodicity, to connect the device until the water supply is reestablished.
See "ART. "Automatic reset function." It must be activated in step 5 of the ADVANCED
MENU (Ar1).
• Rapid cycle warning: when the hydropneumatic tank has lost too much air and,
consequently, frequent starts and stops occur, this warning is activated. Activated
(rc2).
• Manual reset button (RESET).
• 3 Modes of operation: differential, reverse and synchronized.
• Control panel and 3-digit numerical display, illuminated LED indicators and buttons.
• Configuration possibility:
• Standby mode.
• Minimum fast cycle time.
• Connection and disconnection delay.
5. TECHNICAL CHARACTERISTICS
• Rated pump power
• Electrical power supply
• Electrical outlet
• Maximum pressure
• Frequency
• Maximum current
• Degree of protection
• Maximum water temperature
• Maximum ambient temperature
• Maximum relative humidity
• Start-up pressure
• Stopping range
• Maximum differential (Pstop-Pstart)
• Minimum differential (Pstop-Pstart)
• Factory configuration (start/stop)
• Hydraulic network connection
• Net weight (without cables)
www.proindecsa.com / proindecsa@proindecsa.com
4,4KW (5,5HP)
~3 x 230-400 Vac
~3 x 230-400 Vac
1,2MPa
50/60Hz
10 A
IP55
40ºC
50ºC
80% (31ºC) - 50% (40ºC)
0,5÷11,5 bar
1÷12 bar
11,5 bar
0,5 bar
3/4 bar
G 1/4" Hembra
0.654 kg
14
Publicidad
