Silvercrest SSMR 600 A1 Guía Rápida página 22

SSMR 600 A1
DANGER of electric shock
• Only connect the hand-held blender to the mains network once the
motor block (4) and immersion blender (5) are assembled. There
is a risk of electric shock!
• Only plug the hand-held blender into a power socket that is
accordingly installed and easily accessible and whose mains
voltage corresponds with the rating plate specifications. The user
does not have to do anything to switch the product between 50
and 60 Hz. The product is suitable for both 50 and 60 Hz
supplies. Once the device is plugged in, the power socket must be
kept easily accessible so that the plug can be pulled out quickly in
an emergency.
• Never operate the hand-held blender in the vicinity of the bath,
shower or a filled sink.
• The power cord and plug must not be damaged.
• If the device's power cord is damaged, it must be replaced by the
manufacturer, their service department or by a similarly qualified
person in order to prevent any hazards.
• Never open the housing of the motor block (4), as this contains
parts to be maintained. If the housing is open, there is a risk of
electric shock.
• If you notice any smoke, unusual noises or smells, remove the plug
from the power socket immediately. In such cases, you must stop
using the hand-held blender until it has been checked by a
technician. If the device catches fire, do not inhale any resulting
smoke. If you do inhale any smoke, seek medical attention.
Inhaling smoke can be harmful to your health, there is a risk of
injury!
20 - English