Publicidad
Idiomas disponibles
Idiomas disponibles
Translation of the original instructions
TIG PRO 201 AC/DC - TIG PRO 201L AC/DC
Operation:
Manual remote control (option ref. 045675) The manual remote control allows the current to be varied from 50%
to 100% of the set current. In this configuration, all modes and functions of the machine are accessible and can be set.
Foot pedal (option ref. 045682) :The pedal control enables variation of the current from the minimum current to
100% of the set intensity. In TIG, the welding machine only operates in 2T mode. The upslope and downslope are not
automatically managed by the current source, and are controlled by the user with the foot pedal.
FAN
The station integrates a controlled fan system.
VERSION WITH INTEGRATED COOLING UNIT: TIG PRO 201L AC/DC
The protections supported by the cooling unit to ensure the protection of the torch and the user are:
• Coolant thermal protection
The hot and cold liquid connections are marked with coloured rings, respectively red and blue. At the back of the station,
a gauge is used to visually determine the level of liquid in the tank.
Make sure the unit is disconnected from the power supply before connecting or disconnecting the
fluid inlet and outlet hoses from the torch.
The coolant is harmful and irritates the eyes, the mucous membranes and the skin. Hot liquid
may cause burns.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
EN
33
Publicidad
