Finishing Charging; Interrupting Charging; Buffering - Fronius Acctiva Seller Manual De Instrucciones

Finishing charg-
ing
Risk of ignition of oxyhydrogen caused by sparks resulting from the charging leads
being disconnected too soon.
This can result in severe personal injury and damage to property.
► Before disconnecting the charging leads, press the Stop/Start button to end buffering
1
2
3
Interrupting
NOTE!
charging
Danger due to disconnecting or unplugging the connection sockets and connecting
plugs during the charging process.
This can result in damage to connection sockets and connecting plugs.
► Do not disconnect or unplug charging leads while charging.
4
5

Buffering

With buffering, vehicle functions (e.g. car radio, sliding roof, etc.) may be demonstrated
during the charging process. Please note the following:
-
-
-
25 %
WARNING!
mode.
Press the Stop/Start button to complete charging
Disconnect the black charging lead from the negative pole (-) on the battery
Disconnect the charging lead (red) from the positive pole (+) on battery
Press the Stop/Start button while charging
– The charging process is interrupted
– Ready indicator flashes
Press the Stop/Start button again to continue charging
The current used over a long period must be less than the charging current.
If the charging current is less than the current used over a long period, the battery will
become discharged.
The charging period is longer in buffering mode and may therefore trigger a safety cut-
out.
50 % 75 % 100 %
53