Publicidad
Step 5
å
First, fasten the LEFT FRONT/RIGHT REAR POST (B) and REAR
POST (C) to the UPPER RAILS (D and F) and LOWER RAILS (E
and G). Turn six 5/8" HEX HEAD SCREWS (6) through six SPRING
WASHERS (1), through six FLAT WASHERS (2), through the POSTS
and into the RAILS a few turns using the L-WRENCH (3).
å
Then, fasten the FRONT POST (A) and LEFT FRONT/RIGHT REAR
POST (B) to the UPPER RAILS (D and F) and LOWER RAILS (E
and G). Turn seven 5/8" HEX HEAD SCREWS (6) through seven
SPRING WASHERS (1), through seven FLAT WASHERS (2), through
the POSTS and into the RAILS a few turns using the L-WRENCH (3).
å
NOTE: Do not completely tighten the SCREWS at this time.
2
1
(13 of each used)
6
C
B
430362
F
G
www.sauder.com/service
D
Use two
SCREWS here.
E
5/8" HEX HEAD SCREW
(13 used in this step)
Caution
Two person
required
B
A
3
6
Page 9
Publicidad
