Date And Time; Setting The Date And The Time - Siemens Gigaset 4210 Manual De Usuario

Gigaset 4015 Comfort, USA, A31008-G4015-B102-1-7619
Press keys:
0(18
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Appoint./Clock
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Date/Time
For example:
Y<9YY
CY<


Date and Time

Setting the Date and the Time

The date and time settings are necessary in order for
the date and time of the arriving of messages/incoming
calls to be displayed correctly.
You can also set the clock mode, to the 12 hour mode
(AM and PM) or 24 hour mode. If you subscribe the
Caller ID the date and time are automatically set. If you
do not subscribe to Caller ID follow the steps below to
set the date and time.
• The default setting is 12 hour mode.
• If you subscribe to Caller ID, the date and time
may be sent from your telephone service and
will be automatically set.
Date
Press Menu.
Scroll to Appoint/Clock and press OK.
Scroll to Date/Time and press OK.
The current setting is displayed in the MM-DD-YY
mode.
Enter the month/day/year (for example: 05-20-01, as
shown).
Time
Scroll down one line.
Enter the hours/minutes (for example: 10.05, as
shown).
Factory default: 12 hour mode. If am or pm is displayed
next to the time, 12 hour mode is activated. If you
move the cursor to the time field, you can change from
am to pm using the left display key.
Clock Mode (12 or 24 Hours)
By default, the clock is set to the 12 hour mode
and am or pm is displayed next to the time. If
you move the cursor to the time field, you can
change from am to pm using the left soft key.
Scroll down one line to set mode.
If necessary, select either 24 hour or 12 hour display
mode.
6DYH
Save the settings.
uhrzeit.fm
24.08.01
Date and Time
7