Publicidad
Idiomas disponibles
Idiomas disponibles
b.
Press and hold TARE(→) and press ON/OFF , display shows "Fn 1".
c.
Press TARE(→) until display shows "Fn2".
d.
Press MODE(ENT) to enter, display is showing the offset value. Press MODE(ENT) to begin key
testing, the name of the key you are pressing will show on display.
e.
Press MODE(ENT) to exit the current function, display shows "Fn6".
f.
Press MODE(ENT) to enter the next function, or press ZERO(↑) to exit.
4.4 Scales Configuration [Fn3]
ATTENTION !!!
This function is locked by manufactureer and can't modified by user.
4.5 Linearity Calibration [Fn4]
ATTENTION !!!
This function is locked by manufactureer and can't modified by user.
4.6 Zero Tracking Speed [Fn5]
ATTENTION !!!
This function is locked by manufactureer and can't modified by user.
4.7 Digital Motion Filtering [Fn6]
Under this function, user can enable digital motion filtering function if the weighing environment
is unstable. User also can engage animal weighing function for maximum performance. a.
Indicator is off.
b. Press and hold TARE(→) and press ON/OFF, display shows "Fn1".
c. Continue pressing TARE(→) until display shows "Fn6".
d. Press MODE(ENT) to enter, and display shows "Filt 0".
e. Press ZERO(↑) to select the desire setting. There are 3 settings: "0" for off, level "1" and level
"2".
f. Press MODE(ENT) to confirm and exit the current function, display shows "Fn7".
g. Press MODE(ENT) to enter the next function, or press ZERO(↑) to exit. When ZERO(↑) is
pressed, display will show "SAVE" if setting was changed, user can either press MODE(ENT) for
yes to save the changes made or press ZERO(↑) for not to save the changes.
14
Publicidad
