Publicidad
Idiomas disponibles
Idiomas disponibles
When "Fn11" is set at "Ser.1"
2015/04/25
10:30:21 ST, NT,
2015/04/25
10:30:39 ST, NT,
When "Fn11" is set at "Ser.2"
2015/04/25
S/N
WEIGHT
1
100.02
2
99.01
------------------------------------
Sum
199.03
4.13 Printer Selection [Fn12]
Under this function, user can select the peripheral which the scale will be connected to.
a. Scale is off
b. Press and hold TARE(→) and press ON/OFF, display shows "Fn1"
c. Continue pressing TARE(→) until display shows "Fn12"
d. Press MODE(ENT) to enter, and display shows "PC2"
e. Press ZERO(↑) to select the following: "PC" for computer, "tEC" for Toshiba TEC printer,
"ArGoX" for Argox printer, "tSC" for TSC printer and "SH-24" for 24 columns Dot Matrix printer
f. Press MODE(ENT) to confirm and exit the current function, display shows "Fn14"
g. Press MODE(ENT) to enter the next function, or press ZERO(↑) to exit. When ZERO(↑) is
pressed, display will show "SAVE" if setting was changed, user can either press MODE(ENT) for
yes to save the changes made or press ZERO(↑) for not to save the changes.
4.14 Turning ON/OFF RTC [Fn14]
Under this function, user can turn on or off real time clock function.
a. Scale is off
b. Press and hold TARE(→) and press ON/OFF, display shows "Fn1".
c. Continue pressing TARE(→) until display shows "Fn14".
d. Press ZERO(↑) to enter, and display shows "rtC.oF"
e. Press MR(↓) to select between "rtC.on" or "rtC.oF".
100.01kg
210.00kg
10:31:21
UT
kg
kg
kg
19
Publicidad
