Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.1 Package Contents
User manual
Switch power adaptor
Scales
Warranty Certificate
2.2 Level Balance
Place the scale in a stable environment and adjust the adjustable feet to a level position by
referring to the bubble level placed behind it. Avoid to use the scale in places with strong wind,
vibration and excessive heat sources or rapid changes in temperature.
2.3 Connect Power
The scale is equipped with rechargeable battery, please charge it until the charging indicator turns
green to ensure the best battery performance.
Always use factory supplied power adaptor for charging purpose, an unapproved power adaptor
may shorten the battery life and further damages the electronic components.
Warm up the scale for 15 minutes before use for the first time.
2.4 Initial Calibration
Power on the scale, automatically execute the auto tare and showing zero indicator.
At startup the scale will be configured as last session.
3.1 Tare Balance
This indicator equips with auto tare, continuous tare (please refer to Fn.10 of internal setting) and
manual tare.
a) If auto tare function is enabled, the first weight being placed on platter will be automatically
tared.
b) If continuous tare function is enabled, each weight being placed on platter will be
automatically tared.
2. INSTALLATION
3. OPERATION
8
Publicidad
Tabla de contenido
