Publicidad
Idiomas disponibles
Idiomas disponibles
4.6. Area measurement
This measurement allows calculating the area of
surfaces expressed in m
1. With the instrument in stand-by, press the
to select the desired type of reference (see § 4.2)
2. Press the
measuring section. The symbol "
the display with side "1" flashing
3. Press
measurement (length) of the surface concerned
(see Fig. 5). The corresponding value appears on
the first partial display. The symbol "
on the display with side "2" flashing
4. Press the
measurement (width) of the surface concerned (see
Fig. 5). The corresponding value appears on the
second partial display, while the (up-to-date) total
value of the area appears on the resulting display
5. Measuring result is automatically saved in the
instrument's memory
key to enter the Area/Volume
the
key again to perform the second
2
2
2
, in
or ft
key
to
EN - 11
" appears on
perform
the
" appears
DM40
key
first
Publicidad
