HT Instruments DM40 Manual De Instrucciones página 36

horizontally as possible (2) (see Fig. 8) and press
the
second partial display. The symbol "
the display with side "3" flashing
5. Position the instrument in the highest point (3) of
measurement (see Fig. 8) and press the
measure
6. The final value of the result obtained with the
combination of previous measures is shown in the
resulting display
7. Measuring result is automatically saved in the
instrument's memory
Fig. 8: Examples of indirect 3-point measurements
4.10. Operations with the memory
The instrument is provided with a memory section in
which it is possible to recall measuring results. It is
possible to save up to 20 measurements, shown in
reverse order.
➢ Use the
➢ Press the
delete the memory's content
key to measure. The result appears on the
or keys for internal navigation.
and keys at the same time to
EN - 15
DM40
" appears on
key to