Publicidad
Idiomas disponibles
Idiomas disponibles
horizontally as possible (2) (see Fig. 7) and press
the
second partial display
5. The final value of the result (obtained as
is shown in the resulting display
6. Measuring result is automatically saved in the
instrument's memory
Fig. 7: Indirect 2-point measurement
4.9. Indirect 3-point measurement
1. With the instrument in stand-by, press the
to select the desired type of reference (see § 4.2)
2. Press the
measuring section. The symbol "
display with side "1" flashing. The distance to be
measured flashes on the symbol
3. Position the instrument in the lowest point (1) of
measurement (see Fig. 8) and press the
The result appears on the first partial display. The
symbol "
flashing
4. Position
key to measure. The result appears on the
key twice to enter the indirect 3-point
" appears on the display with side "2"
the
instrument
EN - 14
DM40
) 1 ( −
2
" appears on the
)
2
(
) 2
key
key.
as
Publicidad
