Publicidad
1. Arrow mark
1. Flèche
1. Flecha
1. Tapered nut
1. Écrou conique
1. Tuerca cónica
Wheel installation
1. Install the wheel and the nuts.
NOTE:
_
G
The arrow mark
ward the rotating direction of the wheel.
G
Tapered nuts are used for both the front and
rear wheels. Install the nut with its tapered
side towards the wheel.
_
2. Lower the ATV so that the wheel is on the
ground.
3. Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front: 55 Nm (5.5 m·kgf)
Rear: 55 Nm (5.5 m·kgf)
8-83
EBU11211
on the tire must point to-
Publicidad
