Descargar Imprimir esta página

Nilfisk VHS110 Z22 Manual De Instrucciones página 27

Ocultar thumbs Ver también para VHS110 Z22:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CAUTION!
The following use of the device is strictly forbidden:
Do not pull or carry by the cord, use the power
cord as a handle, do not close a door on cord, or
pull cord around sharp edges or corners. Do not
run the appliance over the cord. Keep cord away
from heated surfaces.
Vacuuming the following materials:
1.
Burning materials (embers, hot ashes, lit
cigarettes, etc.).
2.
Naked flames.
3.
Combustible gas.
4.
Flammable liquids, aggressive fuels (gasoline,
solvents, acids, alkaline solutions, etc.).
5.
Explosive dust/substances and/or ones liable
to ignite in a spontaneous way (such as
magnesium or aluminium dusts, etc.).
Note: Fraudulent use is not admitted.
Testing and guarantee
Testing
Each machine is subjected to a final test involving its
operation and performances. This guarantees maximum
efficiency during the work the machine must carry out.
Warranty
The guarantee clauses are specified in the sales contract.
How to request assistance
In the event of faults or malfunctions requiring the intervention
of specialized technicians, contact the Manufacturer or your
nearest After-Sales Service Centre.
Exclusion of liability
The machine was delivered to the user according to the
conditions valid at the time of purchase.
For no reason what so ever shall the user be authorized to
tamper with the machine.
Contact your nearest After-Sales Service Centre in the event
of faults.
All attempts by the user or by unauthorized personnel to
demount, modify or, more generally, tamper with any part of the
machine shall void the guarantee and relieve the manufacturer
of all responsibility for damage to either persons or property
caused by such action.
The manufacturer shall also be relieved of liability in the
following cases:
Wrong installation.
Improper use of the machine by inadequately trained
personnel.
Utilization contrary to the provisions in force in the country
of use.
Incorrect or insufficient maintenance.
Use of non-genuine spares or use of spares that are not
specifically made for the model in question.
Total or partial failure to comply with the instructions.
Failure to forward the warranty certificate.
Exceptional environmental events
Versions and variations
HEPA variations (AU)
This machine can be equipped with a filter (HEPA). The
procedures for servicing and emptying the machine including
removing the dust container, must only be performed by
authorized personnel wearing protective clothing. Do not use
without the complete filter system in place.
General recommendations
CAUTION!
If an emergency situation occurs:
for example, accident - fault - filter breakage - fire
- etc.
Disconnect the machine from the power supply and ask
for assistance from qualified personnel.
In case the user comes into contact with the vacuumed
product, check the cautions shown on the safety
technical sheet of the product, which must be made
available from the employer.
Check the place of work and substances tolerated for the
machine suitable for liquids.
CAUTION!
The machines must not be used or stored outdoors, or
in damp places.
Only versions with the level sensor can be used for
liquids, if not, they can only be used to vacuum dry
materials.
CAUTION!
Version for liquids.
If foam or liquid leaks out of the machine, turn it off
immediately and contact qualified personnel for
assistance.
These devices must not be used in corrosive environment.
Residual Risks
After carefully considering the risks that are present in all
machine operating phases, necessary measures were adopted
in order to eliminate the risks for the operators, as far as
possible, and/or limit or reduce the risks deriving from hazards
that cannot be completely eliminated at the source.
During
operations
and/or
exposed to certain residual risks which, due to the nature of
the operations themselves, cannot be completely eliminated.
Therefore the installer is responsible for providing additional
information and/or hazard signals based on the location of
machine installation and the material that is handled.
Risks due to electrical hazards during maintenance
5
VHS110 Z22
[ NOTE ]
[ NOTE ]
maintenance,
operators
IT
GB
F
D
E
are
C421

Publicidad

loading