Publicidad
Idiomas disponibles
Idiomas disponibles
B
Installation
CAUTION : Get two or more people to move the appliance.
Failure to do so may result in a back injury or other
injuries.
Location
• When deciding where to install the appliance, make sure that the floor is level and stable
and that the room is adequately ventilated. Do not install your appliance near a heat source,
such as a stove, boiler or radiator. Also, do not expose it to direct sunlight, as this may increase
power consumption. Extremely cold ambient temperatures can also cause the appliance to
malfunction. This appliance is not designed to be used in a garage or outdoors. Do not wrap
the appliance with a covering.
• When installing the appliance, make sure that there is a gap of 40 cm on both sides, as well
as a 15 cm gap behind it and a 20 cm gap above. This gap allows cold air to flow around the
wine cooler and make the cooling process more efficient. The door can open to the right or
to the left, depending on the layout of the room and its location.
• What's more, do not expose it to direct sunlight, e.g. in an annexe or a veranda.
• Make sure there is enough space so that the door opens fully.
Cleaning before use
• Wipe the inside of the appliance with a diluted solution of bicarbonate of soda. Then rinse
it with warm water using a sponge or a "wrung-out" cloth. Wash the shelves and the salad
bin with warm soapy water. Then dry them thoroughly before putting them back inside the
appliance. Clean the outside of the appliance with a damp cloth.
• For more information, go to the "Cleaning" section.
Using the appliance
6
EN
Publicidad
