Publicidad
Idiomas disponibles
Idiomas disponibles
B
Use
Temperature control
The temperature control is located on the right wall inside the appliance.
OFF: Appliance off
MIN: Minimum
MED: Medium
MAX: Maximum
• Ambient temperatures for using the appliances in accordance with the climate classes.
Follow the climate classes specified on the appliance's nameplate. This can be used to check
the recommended ambient temperature of the appliance:
A multi-class appliance can handle the lowest and highest temperature of all the classes
covered.
Example: SN/N/ST: Can be used between 10 and 32°C
Using the appliance in temperatures outside the recommended range will lead to inferior
performance and premature ageing.
• Thermostat adjustment and OK disc
For optimal use and to save energy, adjust the temperature control of the appliance according
to the ambient temperature of the room, in which it is being used, and respect the climate
class(es).
The temperature control setting also depends on several factors such as the location of the
appliance, how often the door is opened and how much food and drink is in the appliance. The
temperature thermostat setting should be adjusted to compensate for these factors.
Important: Make sure that the OK disc located on one of the walls of the appliance is clearly
visible at least 6 hours after adjusting the temperature control. Increase the temperature
control setting slightly if it is not visible. This disc is located in the cold area of the appliance.
This storage area has an average temperature less than or equal to +4°C when the OK message
is visible.
Using the appliance
8
EN
Publicidad
