Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
1
Remove the plastic covering from the upper door hinge.
2
Loosen the 3 screws of the lower bracket. Remove the foot from the opposite side.
3
Place it on one side.
Slide the appliance door downwards by about 15 cm, then take it off the upper
4
hinge pin and lift it up to release it from the appliance.
Remove the 2 screws from the top bracket and place them on the other side. You
5
will need to remove the plastic caps from the other side beforehand.
Slide the door of the appliance to reattach it to the upper hinge, making sure it is
the right way up. Screw the lower hinge into place on the new side. Put the other
6
foot in place on the other side. Replace the plastic cover so that it clicks into place
on the door hinge.
Make sure that the door is aligned horizontally and vertically, and that the seals
7
are closed on all sides before tightening the lower hinge. Adjust the levelling feet.
8
The appliance door must be able to open fully, as shown (W87 x H105 x D107).
To make it level, adjust the two levelling feet on the front of the appliance. If the
9
appliance is not level, the door and the magnetic seal may not be aligned.
12
EN
Publicidad
