Publicidad
PASO 26
Gearbox assembly: Parts preparation
PASO 27
Gearbox assembly (part 1)
Attach the adapter to the PG-assembly, making sure the spur gears are correctly
aligned and fit snugly into the pockets on the adapter.
Carefully slide the PG-ring onto the adapter, pushing it all the way in gently, until it
locks onto the gears.
Note there is a chamfer on one side of the PG-ring. This side should be facing
the gears, while inserting the PG-ring.
Gently rotate the adapter while sliding the PG-ring onto the gears to align the
gearbox properly.
Retira el adaptador, mientras sujetas la caja de engranajes en su lugar.
9A. MK4 Nextruder mod
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
PG-assembly adapter (1x)
PG-ring (1x)
M3x25 screws (3x or 4x depending
on the Nextruder version)
PG-case assembly (1x)
103
Publicidad
