Publicidad
PASO 13
Gears calibration
Now, we need to calibrate the planetary gearbox in the Nextruder.
Go to the Home screen and navigate to Control -> Calibrations & Tests, scroll down
and select Gears Calibration.
Once you get to the Gearbox Alignment part, select Continue and follow the on-
screen instructions.
PASO 14
Gearbox Alignment
During the Gear calibration process, you will be prompted to:
Undo the idler lock (swivel). Make sure it is in the open position - lifted up.
Afloja 1,5 vueltas los tres tornillos de la parte delantera de la caja de engranajes.
La impresora realizará el alineamiento automático de los engranajes. Este
proceso no es visible desde el exterior.
Once prompted, tighten the three screws in the indicated pattern.
10A. Configuración y Calibración MK4
Ensamblaje Original Prusa MMU3
149
Publicidad
