Publicidad
PASO 17
Collet installation
Insert one of the collets into the marked position on the cartridge.
Note, for an easier instalation, you might want to squish the small fins together
while you insert the collet into the opening. Otherwise, one of the fins might spread
outwards, resulting in a damaged collet.
Insert another collet into the other opening.
Install collets into the remaining four cartridges too.
PASO 18
Cartridge installation
Now, prepare all 5 cartridges and the buffer body.
Take one of the cartridges and hold it by the two handles. Squish the handles
together for insertion.
Insert the cartridge into the buffer body.
Make sure the cartridge is properly inserted.
For a later cartridge removal, squish the two handles together and pull it out.
Insert all the cartridges into the buffer body.
78
7. Montaje del Casete del buffer
Ensamblaje Original Prusa MMU3
Publicidad
