en
16
STELLA
4.
Install the foot plate and secure with lock nut from hardware parts (4).
After installation, test the foot plate if it is properly installed.
Note: (a) Apply Loctite 263.
(b) Hand tight only. Leave small allowance between the nut and the foot plate to
allow free movement.
5.
Prepare the stabilizers for installation. Secure it with 6 pieces of screws M10 X 30
and 6 pieces of washers D10.2 from hardware parts (3). Apply locktite 263 (a) and
tighten with a torque of 47Nm.
MULTIFUNCTION FLOODLIGHT TOWER