Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of the
Lifting Bracket
Installation of the
Mast Assembly
en
18
STELLA
1.
Install the lifting weldment. Secure it with 4 pieces of screws M10X30 and 4 pieces
of Lock Washer D10. 2 from hardware parts (3). Apply locktite 263 and tighten to an
approximate torque of 47Nm.
Note: Considering the safety factor, it is recommended that more than two people install
together.
1.
Remove mast and lamp head from the wooden box.
MULTIFUNCTION FLOODLIGHT TOWER
Publicidad
