Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of
the Lamps
MULTIFUNCTION FLOODLIGHT TOWER
2.
Place the mast assembly on the top of the cart and prepare for assembly. Use 6
pieces of screws M12X35 and 6 pieces of washers from the hardware parts (1).
Apply Loctite 263 (a) and tighten with a torque of 81 Nm.
1.
Install the lamp head assembly into the mast. Lock the lever (a) to prevent and limit
the movement of the lamp head.
2.
Remove LED flood light from the carton. There are four lights in total, as shown
below. Install the lamps into the lamp head using f pieces of nuts from the hardware
parts (5).
Note: The fixed handrails should face outwards.
en
STELLA
19
Publicidad
