Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
Depending on the model, the door consists of two additional glass panels, with a black rubber spacer at
each corner. If necessary, remove them to clean.
Do not soak the glass panels in water. Rinse with clean water and dry off with a lint-free cloth.
A
A
A
A
A
A
• Re-assembling the door
After cleaning, reposition the four rubber stops with the arrow upwards.
Reposition all of the glass panels.
Slip the last glass panel into the metal stops, then clip it in with the shiny side facing outwards.
Remove the plastic wedge.
Your appliance is now ready for use again.
• Replacing the oven lamp
Warning:
Make sure the appliance is disconnected from the power before replacing the lamp in
order to avoid the risk of electric shock. Change the lamp only when the appliance has
cooled down.
Bulb specification:
25 W, 220-240 V~, 300°C, G9 cap.
To unscrew the view port and the light, use
a
rubber
glove,
disassembly easier. This product contains a
light source of energy efficiency class G.
which
will
make
19
Publicidad
