Publicidad
Idiomas disponibles
Idiomas disponibles
4.7
CONNECT THE BATTERY TO THE
PRODUCT
Note: The product features an automatic switch
function that enables the other battery to operate
when the power level of the first battery is low.
1.
Open the battery door.
2.
Align the ribs on the battery with the grooves in
the battery compartment.
3.
Push the battery into the battery compartment
until the battery locks into place.
4.
When you hear a click, the battery is installed.
5.
Close the battery door.
Note: The motor will start only after inserting the
safety key.
4.8
START THE PRODUCT
1.
Make sure safety key is inserted into the key slot.
2.
Press and hold the power button. Then, grasp
either of the blade activation levers towards the
handle bar to engage the blades.
Note: Complete the two consecutive actions within
5 seconds.
2
L
R
3.
Once the product has started, you can release
the power button.
1
TURBO
English
4.9
ACTIVATE TURBO BOOST (TEMPORARILY
INCREASED CUTTING SPEED)
1.
Press the turbo button to increase the speed up
to RPM.
2.
Release the turbo button to operate at the default
cutting speed.
Note: When using the turbo boost button,
the battery will drain faster. Therefore, it is
recommended to use the turbo boost button only
when necessary.
4.10
OPERATE THE SELF-PROPELLED DRIVE
SYSTEM
4.10.1
SELF-PROPELLED DRIVING SYSTEM
1.
While holding the blade activation lever, pull
either of the drive levers towards the handlebar
to engage the self-propelled driving system.
2.
Release either set of start handle and drive lever
from the same side.
3.
Adjust the speed control with your free hand.
Note: To sustain self-propelled mowing,
continually hold the blade activation lever and
drive lever from either the left or right side at
the same time.
• To increase the speed, slide the speed control
switch towards the Rabbit Symbol.
• To decrease the speed, pull the speed control
switch towards the Turtle Symbol.
11
L
TURBO
R
TURBO
L
TURBO
R
EN
Publicidad
