Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Examine the two motor shafts to ensure there are no signs of damage. If any damage is present, it is advisable
to consult an authorized service center for replacement.
Install New Blade
NOTE:Blade mount (1) and mounting nut (7) for blade A only; blade mount (2) and mounting nut (5) for blade
B only. Spacers of blade A are interchangable with that of blade B.
Blade A
1.
To install blade A, place blade mount (1) over the motor shaft on the left.
2.
Insert Blade A (3), ensuring that the cutouts on the blade align with the blade mount(1).
NOTE:Ensure that the angled ends of the blade are oriented in the direction of the cutting cover and
that the cutting edges face towards the ground.
3.
Then, attach the spacer (6) and nut (7). Use a wrench to rotate the nut counter-clockwise to securely tighten.
Recommended tightening torque: 11 ft. - lbs. (15 N.m.)
Blade B
English
1
A
4
3
5
6
7
B
A
1
A
A
3
6
7
15
2
B
6
EN
Publicidad
