Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1.
To install blade B, place the blade mount (2) over the motor shaft on the right.
2.
Insert blade B (4), ensuring that the cutouts on the blade align with the blade mount (2).
NOTE:Ensure that the angled ends of the blade are oriented in the direction of the cutting cover and
that the cutting edges face towards the ground.
3.
Then, mount the spacer (6) and nut (5). Use a wrench to rotate the nut clockwise to securely tighten.
Recommended tightening torque: 11 ft. - lbs. (15 N.m.)
NOTE:After attaching the blade, start the product and conduct a blade test to ensure it is properly installed.
If the blade is not correctly installed, it can result in product vibrations or affect cutting performance.
Keep track of the following parts:
• The blade mount (1) is specifically designed for blade A, while the blade mount (2) is designed for blade B.
• Take note that the nut (7) used to secure Blade A is a reverse-threaded nut, and it is only meant for blade A.
• The spacers can be interchanged between the two sides during blade installation.
6
TRANSPORTATION, STORAGE, AND
DISPOSAL
6.1
SET THE PRODUCT IN TRANSPORTATION
POSITION
1.
Remove the grass catcher.
2.
Remove the battery and safety key.
3.
Pull the handlebar latch to fold the handles.
1
4.
Lock the handles into position.
B
2
1
English
2
B
4
6
5
5.
Position the mower in a vertical position and
make sure that the brackets touch the floor.
16
Publicidad
