Fanvil H1 Guía De Instalación Rápida página 5

Device installation
Please follow the instructions in below picture to install the device.
Bracket desktop installation
Wall mounting (wall stand need buy separately)
Hotel Phone
Message Front Desk Assistant Manager Room Service
SPA Wake Up
Restaurant Emergency
Connecting to the device
Please connect power adapter, network, and handset to
the corresponding ports as described in below picture.
① Network port: connecting local area network or Internet.
② Power port: connect the power adapter.
③ Handset port: connect IP Phone handset.
Internet
①
Note: You can contact your service provider for additional settings that may be necessary to con-figure the phone, or download the user
manual and FAQ for more detailed information.
DC 5V Handset
② ③
Network connect
Using Ethernet
1. The power on the device and connect the WAN port of the
phone to the RJ45 socket of a hub/switch or a router
(LAN side of the router) using the Ethernet cable.
2. The default is DHCP mode.
Phone configuration
Configuration via web
1. 1.Get the IP address : Press the "#" key for more than 6
seconds to broadcast IP;
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment (The default
username and password are both 'admin') ;
3. Configure: Select network/account etc, and fill the relevant
content ;
4. Save the configuration.
Making a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press
4. Memory key: press memory key.
Accepting a call
1. Using the handset: pick up the handset.
2. Using the handsfree: press
Redial
1. Press key, redial a call number.
- 3 -
or vice versa.
.