Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE DEEP TISSUE PROGRAMS
Deep Tissue programs
Select from the following Deep Tissue programs:
• Deep Stretch: Intense back stretch for deep muscle penetration.
• Deep Breath: Sync your breath with the rhythmic movement of the chair
and relax into deep meditation.
• Deep Soothe: Relax with acupressure for a deep and soothing massage.
Customize your Deep Tissue massage FOCUS by selecting from the following
settings:
• Full: Massages your full back.
• Zone: Focuses your massage in a limited zone. Use the Position buttons
to position the massage zone where you want it. Choose from Short (3"),
Medium (6"), or Long (9") zone range.
• Spot: Massages your back in a single spot. Use the position buttons to
position the massage exactly where you need it.
CONFIGURING CLOUD TOUCH, HEAT, AND OTHER SETTINGS
Setting Cloud Touch massage focus and intensity
The Cloud Touch massage uses air to massage you from head to toe. You can
select one or more Cloud Touch massage areas and set the intensity at any time
during an auto massage program. You can also enjoy a Cloud Touch massage
independent of any auto program.
1. From the main menu, select CLOUD TCH to display the Cloud Touch menu.
2. Select FOCUS, then select the area(s) you wish to activate. You must select a
massage focus before selecting the intensity.
3. Select INTENSITY, then select the desired air intensity, or select OFF
to stop the Cloud Touch massage.
TIP: During any massage, press the CLOUD button on the remote control to adjust the Cloud Touch intensity.
The selected intensity displays next to CLOUD TCH in the upper left corner of the main screen.
Using backrest heat
The default backrest heat setting is Off. To turn on the heat,
press the HEAT button on the remote or select HEAT from the
main menu then select ON.
humantouch.com
10
Setting back massage intensity
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select INTENSITY, then select the desired back massage intensity.
TIP: Use the navigation buttons on the main screen to configure the
settings in the upper left-hand corner.
Setting the underfoot roller speed
You can set the underfoot roller speed to slow, medium, or fast. You can also turn
the rollers off.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select FOOT SPD, then select the desired speed.
TIP: Use the navigation buttons on the main screen to configure the
settings in the upper left-hand corner.
Foot massage too soft? Remove the
softening soles from underneath your feet.
Simply open the foot/calf massage well
zippers, remove the softening soles from
the bottom of the massage wells, then
close the zippers.
Softening Soles
Configuring and disabling the Stretch feature
You can set the stretch direction to stretch your legs either outward or down.
You can also turn off the stretch feature. When stretch is turned off, the
Energize programs do not include the stretch feature. When the chair is
powered off and on again, this stretch setting resets to On.
1. From the main menu select SETTINGS to display the Settings menu.
2. Select STRETCH, then select the desired setting.
Configuring massage duration
You can set your massage duration to 10 (default), 20, or 30 minutes.
1. From the main menu, select SETTINGS to display the Settings menu.
2. Select TIME, then select the desired massage duration.
Bottom of the
massage wells
11
Publicidad
