Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION FOR USE
7.
Check whether the contact surface of sealing strip (E) has integrity and sealing is sufficient. If necessary, take the sealing strip of
the tank out of the groove (F) and replace it. Assemble the new sealing strip as shown in (Figure 17), the joint should be back in the
middle area.
8.
Close the recovery tank lid (A).
C
D
ACCESSORIES/OPTIONS
In addition to the standard components, the machine can be equipped with the following accessories/options, according to the machine
specific use:
For further information concerning the above-mentioned optional accessories, contact an authorized Retailer.
ACCESSORIES/OPTIONS
See "Parts List" section
1.
GEL/AGM batteries
2.
Pads of different materials
3.
Brush of different materials
4.
On-board charger
5.
Squeegee blades of different materials
A
B
Figure 17
24
ENGLISH
E
F
B
Publicidad
