Publicidad
Idiomas disponibles
Idiomas disponibles
2. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and success.
Note:
In accordance with the applicable product liability laws, the manufacturer
of this device assumes no liability for damage to the device or caused by
the device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the electrical regulations
and VDE provisions 0100, DIN 13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manual before installing
and commissioning the device.
This operating manual should help you familiarise yourself with your power
tool and teach you how to use it for its intended purpose.
The operating manual include important instructions for the safe, proper
and economic operation of the power tool, for avoiding danger, for mini-
mising repair costs and downtimes and for increasing the reliability and
extending the service life of the power tool.
In addition to the safety instructions in this operating manual, you must also
observe the regulations applicable to the operation of the power tool in
your country.
Keep the operating manual package with the power tool at all times and
store it in a plastic cover to protect it from dirt and moisture. They must be
read and carefully observed by all operating personnel before starting
the work. The power tool may only be used by personnel who have been
trained to use it and who have been instructed with respect to the associ-
ated hazards.
In addition to the safety instructions in this operating manual and the sepa-
rate regulations of your country, the generally recognised technical rules
relating to the operation of such machines must also be observed.
We accept no liability for accidents or damage that occur due to a failure
to observe this manual and the safety instructions.
3. Device description (fig. 1-9)
1.
Transport handle
1a. Screws M8x10
2.
Pressure switch
3.
On/off switch
4.
Air filter
4a. Filter housing
4b. Filter element
4c. Filter cover
4d. Hose
5.
Wheel
5a. Hexagonal screw
5b. Washer
6.
Drain screw for condensate
7.
Supporting foot
8.
Pressure vessel
9.
Safety valve
9a. Exhaust nut
9b. Connection lock
9c. Cap of exhaust nut
10. Quick coupling (regulated compressed air)
11. Pressure gauge (set pressure can be read off)
12. Pressure gauge (vessel pressure can be read off)
13. Compressed air hose (not included in the scope of delivery)
13a. Plug nipple
13b. Quick coupling
14. Pressure regulator
15. Transport lid
4. Scope of delivery
1x Air filter
1x Transport handle
2x Screws M8x10
1x Supporting foot
2x Wheel
1x Assembly material
1x Operating manual
5. Proper use
The compressor is designed to generate compressed air for compressed-
air driven tools which can be driven with an air volume of up to approx.
149 l/min (e. g. tire inflator, blow-out pistol and paint spray gun). Due to
the limited air output it is not possible to use the compressor to drive tools
with very high air consumption (for example orbital sanders, die grinders
and hammer screwdrivers).
The compressor may only be operated in a dry and well ventilated indoor
space.
The machine may only be used in the intended manner. Any use beyond
this is improper. The user/operator, not the manufacturer, is responsible for
damages or injuries of any type resulting from this.
GB/IE/NI/CY/MT
3
Publicidad
