Fox AWL Manual Del Propietário página 11

COMPRESSION ADJUSTMENT
RAIL COMPRESSION ADJUST (AWL ONLY)
REBOUND ADJUSTMENT
Rebound controls the rate of speed at which the fork extends after compressing. The rebound
adjustment is dependent on the air pressure setting. For example, higher air pressures require
slower rebound settings. Use your air pressure to find your rebound setting. The rebound adjuster is
located underneath the damper-side fork leg.
OPEN
(COUNTER-CLOCKWISE)
LEAST AMOUNT OF
REBOUND DAMPING,
FORK REBOUNDS
FASTEST
The 2-Position Sweep Adjust
lever is useful to make
on-the-fly adjustments to
control fork performance. Use
the positions between OPEN
and FIRM modes to fine-tune
your compression damping
9 8 7 6
RAIL REBOUND
Turn your rebound knob to the closed
position, clockwise until it stops.
Then turn it counter-clockwise to the
number of clicks shown in the table
on page 11.
.
5 4 3 2
11
CLOSED
1
(CLOCKWISE)
MOST AMOUNT OF
REBOUND DAMPING,
FORK REBOUNDS
SLOWEST