Publicidad
Idiomas disponibles
Idiomas disponibles
Symbols used in this manual
WARNING!
Denotes impending danger. Non- observance
of this warning may result in death or
extremely severe injuries.
CAU TION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
N OTE
Denotes application tips and important
information.
Symbols on the power tool
V
Volts
/min
Rotation rate
Read the instructions
Wear eye protection.
Wear mask!
Disposal information for the old
machine (see page 21)!
For your safety
WARNING!
Before using the power tool, please read the
follow:
these operating instructions,
the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
party, or the power tool or other property may be
damaged.
16
SBE 64 18-EC/SBE 127 18-EC
The cordless compact band saw and deep cut
band saw may be used only
as intended,
in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
The cordless compact band saw and deep cut
band saw is intended
– for commercial use in industry and trade,
– for professional metal and plastics cutting
applications.
– for use with saw bands and accessories
which are recommended by the
manufacturer.
– not designed for cutting wood or similar
materials.
Safety instructions for band saw
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
■ Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessories
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
■ Secure the workpiece. Clamping devices or
a vise will hold the workpiece in place better
than the hand.
■ Secure material before cutting. Never hold
it in your hand or across legs. Small or thin
material may flex or vibrate with the blade,
causing loss of control.
■ Keep hands away from cutting area and
blade. Keep your other hand on the front
handle. If both hands are holding the saw,
they cannot be cut by the blade.
■ Do not use a damaged blade. Before each
use inspect the blade for cracks, chips or
other damage. Replace a damaged blade
immediately.
■ Keep hands from between the blade
and material guide. Always start cut with
workpiece on the material guide. When tool
starts work will be pulled to the material
Publicidad
